| WO # | Equipment | Status | Symptom | Reported At | Assignee | Resume |
|---|---|---|---|---|---|---|
| 8684b7db | CV-69 | In Progress | Catastrophic electrical failure with bare copper wire exposure, 5000V leakage, exploded sensor LED, and operator electric shock injury | 10/1/2026 | swilson@e-fcci.com | |
| 6acf49b2 | CV-64 | Resolved | Motor runs but conveyor belt is mechanically jammed | 10/1/2026 | rshelley@e-fcca.com | |
| 41c28bc3 | BALANCE MACHINE 2 LINE 1 | Resolved | Loader Unit (Horizontal/Lift Axis) will not return to home | 10/1/2026 | rshelley@e-fcca.com | |
| 7df49a36 | WASH-30 | Resolved | Outgoing loader confirmation alarm during gripper gripping (Air Chuck) | 10/1/2026 | rshelley@e-fcca.com | |
| 5c25cc7d | BALANCE MACHINE 2 LINE 1 | Resolved | CPU screen black and unresponsive during homing attempt | 9/30/2026 | zglover@e-fcca.com | |
| 93b3a03f | DEBUR LINE 2 | Resolved | Sensor Error on the Phase Positioning module | 9/30/2026 | zglover@e-fcca.com | |
| 50d4f28b | DEBUR LINE 2 | Resolved | Homing failure on Station 6 (pusher will not return to home position and faults out after moving a few millimeters) | 9/30/2026 | zglover@e-fcca.com | |
| 72890b20 | DEBUR LINE 2 | Resolved | Station 8 Pusher Alarm / Part Jam suspected | 9/30/2026 | rshelley@e-fcca.com | |
| 620665ff | SLEEVE PRESS LINE 2 | Resolved | Excessive sleeve depth kick outs on Servo Press | 9/30/2026 | rshelley@e-fcca.com | |
| 0cd5775a | SLEEVE PRESS LINE 2 | Resolved | QA MC alarm and PLC CPU fault (Solid ERR LED) that will not clear | 9/29/2026 | zglover@e-fcca.com | |
| 391d93c2 | BALL PRESS LINE 1 | Resolved | Ball Press 2 Shutter 2 Alarm | 9/29/2026 | rshelley@e-fcca.com | |
| 8778fd54 | CV-69 | Resolved | Conveyor works mechanically but upstream process will not discharge workpieces onto it | 9/29/2026 | zglover@e-fcca.com | |
| f4829f35 | AIR LEAK POROSITY-LINE 1 | Resolved | Parts not advancing — Alarm F81 displayed on GOT | 9/29/2026 | rshelley@e-fcca.com | |
| 372347a1 | DEBUR LINE 1 | Resolved | Lifter became unlatched, rotated, and wedged on the conveyor during descent | 9/28/2026 | rshelley@e-fcca.com | |
| e8baa493 | BALL PRESS LINE 1 | Resolved | Multiple ball detect alarms | 9/28/2026 | rshelley@e-fcca.com | |
| e59e460a | WASH-28 | Resolved | ST#3 turnover chuck limit switch (LS) alarm. Physically, gripper is open but gripper closed sensor remains ON. | 9/27/2026 | rshelley@e-fcca.com | |
| 80491623 | PT-05 | Resolved | Alarming out for NG O-Ring 3 | 9/27/2026 | rshelley@e-fcca.com | |
| f87da0dc | WASH-26 | Resolved | Table is stopping hard | 9/27/2026 | rshelley@e-fcca.com | |
| 50fb9f4e | WASH-30 | Resolved | Machine fault: oil tray under machine pump time over | 9/24/2026 | zglover@e-fcca.com | |
| 8cea2dda | BALL PRESS LINE 1 | Resolved | Ball bearing jammed on escapement 2 at the parts feeder (P/F) | 9/22/2026 | zglover@e-fcca.com |
1-20/132 (1/7)